Comtech EF Data CDM-625A Installation And Operation Manual page 339

CDM-625A Advanced Satellite Modem
Serial-based Remote Product Management
Command
Parameter Number of
(Instruction
Type Arguments
& Qualifier)
BUC N/A 4 bytes
Temperature
BUC N/A 1 byte, value of
Phase Lock 0 or 1
Loop
BUC Software N/A 2 bytes
Version
BUC N/A 2 bytes
Power Class
Query only.
BUCTemperature, in the form sxxx, where:
s = sign
xxx = number
Note: This query is only valid when the FSK and BUC power are turned On.
Query only.
BUC phase lock loop in the form x, where:
0 = Locked
1 = Unlocked
Note: This query is only valid when the FSK is enabled.
Query only.
BUC software version in the form xx, where xx is between 0 and 15.
Note: This query is only valid when the FSK and BUC power are turned On.
Query only.
BUC Power Class in the form xx, where xx indicates the Power Class in watts.
Example: BPC=25
Note: This query is only valid when the FSK is enabled.
Description of Arguments
8–57
Revision 0
MN-CDM625A
Query
Response to
(Instruction & Response to Query
Command
Qualifier)
N/A BUT? BUT=sxxx
Exception – (see Description of
600L Emulation: Arguments)
ODT?
N/A BPA? BPA=x
(see Description of
Exception – Arguments)
600L Emulation:
OLL?
N/A BSV? BSV=xx
Exception – (see Description of
600L Emulation: Arguments)
OSV?
N/A BPC? BPC=xx
Exception – (see Description of
600L Emulation: Arguments)
OPC?