Lnb Parameters (L-Band Device) - Comtech EF Data CDM-625A Installation And Operation Manual

CDM-625A Advanced Satellite Modem
Serial-based Remote Product Management
8.5.9

LNB Parameters (L-Band Device)

Command
Parameter Number of
(Instruction
Type Arguments
& Qualifier)
LNB LPS= 1 byte
DC Power
Control
Exception –
600L Emulation:
LNB & LNV
LNB LNR= 1 byte, value of
Reference 0 or 1
Enable
LNB LNL= 3 bytes
Low Current
Limit
LNB LNH= 3 bytes
High Current
Limit
LNB N/A 4 bytes
Current
LNB N/A 4 bytes
Voltage
Command or Query.
LNB DC Power Supply Control, in the form x, where:
0 = OFF
1 = 13V LNB Voltage
2 = 18V LNB Voltage
3 = 24V LNB Voltage
Command or Query.
LNB Reference Enable, in the form x, where:
0 = Disable LNB Reference
1 = Enable LNB Reference
Command or Query.
Low Current Limit in the form xxx, where xxx is a value between 0 and 500 mA.
Command or Query.
High Current Limit in the form xxx, where xxx is a value between 0 and 500 mA.
Query only.
LNB Current in the form xxxx, where the value is in mA.
Query only.
LNB Voltage in the form xxxx, where the value is in volts.
Description of Arguments
8–58
Revision 0
MN-CDM625A
Query
Response to
(Instruction & Response to Query
Command
Qualifier)
LPS= LPS? LPS=x
LPS? (see Description of
LPS* Arguments)
LPS# Exception –
600L Emulation:
LNB & LNV
LNR= LNR? LNR=x
LNR? (see Description of
LNR* Arguments)
LNR#
LNL= LNL? LNL=xxx
LNL? (see Description of
LNL* Arguments)
LNL#
LNH= LNH? LNH=xxx
LNH? (see Description of
LNH* Arguments)
LNH#
N/A LNC? LNC=xxxx
(see Description of
Arguments)
N/A LVO? LVO=xxxx
(see Description of
Arguments)