Table of Contents
Advertisement
CDM-625A Advanced Satellite Modem
Telnet Command Line Interface (CLI) Operation
9.2
Using the Telnet Command Line Interface (CLI)
In order to use the Telnet CLI to make configuration changes to the CDM-625A,
Remote Access Mode should always be set to [Ethernet].
9.2.1 Telnet CLI Menu System – Parallel Functionality
The Telnet CLI allows monitoring, configuration, and control of the CDM-625A Satellite Modem
in a manner similar to functionality provided via its front panel menus and the CDM-625A Web
Server Interface. See those chapters for more in-depth explanations of operation.
•
Chapter 6. FRONT PANEL OPERATION
•
Chapter 7. ETHERNET-BASED REMOTE PRODUCT MANAGEMENT
Certain configuration menu selections (e.g., Carrier-in-Carrier) are functional only
when that FAST feature has been purchased and enabled for operation. This chapter
documents the CLI as if all available options are installed – your configuration may
or may not provide the level of functionality as described in this chapter.
9.2.2 CLI Menus – Common Navigation and Operation Features
1. The CLI organizes operation under a hierarchy of Configuration and Information functions. You
may select a configuration submenu or information page (e.g., Administration, Statistics, etc.)
from this top-level menu, either by typing in the bracketed hot key that preceeds the submenu
name, or by using the ↑↓ arrow keys and pressing ENTER. Each submenu provides nested
dialog windows requiring further action.
2. The bottom of each "screen" shows the possible actions to take.
Home (Main) Menu page:
Submenu or nested pages (e.g., Administration, Statisdtics, etc.):
Dialog windows:
Table pages:
9–7
Revision 0
MN-CDM625A
Advertisement
Chapters
Table of Contents
