Home > Network > Lan Ip - Comtech EF Data CDM-625A Installation And Operation Manual

CDM-625A Advanced Satellite Modem
Telnet Command Line Interface (CLI) Operation
9.3.4.2 Home > Network > LAN IP
Open the LAN IP page from the Network submenu. This page contains the following options:
Hot
Dialog Window
Key
A 2048-byte Ethernet Frames
B Default Gateway
C IP Address
D IP Network Prefix
E Switch MAC Learning
F
L2 QoS
G
L3 QoS
H Working Mode
I
Packet Processor Enable
Press a hot key to open a dialog window. Otherwise, press [ESC] to return to the Network
submenu.
Option Entry
Use the ↑↓ arrow keys to select Disabled or Enabled
Typical for either entry – Enter an IP address in the form
XXX.XXX.XXX.XXX
Enter a value from 8 to 30
Use the ↑↓ arrow keys to select Off or On
Use the ↑↓ arrow keys to select Off, VLAN Prio Only, Port Prio
Only, or VLAN and Port Prio
Use the ↑↓ arrow keys to select Off, Advanced QoS Max
Priority, Advanced QoS Min Max, or Advanced QoS DiffServ
Use the ↑↓ arrow keys to select Managed Switch, Router
Point-to-Point, Router Multipoint Hub, or Router Multipoint
Remote
Use the ↑↓ arrow keys to select Disabled or Enabled
9–43
Revision 0
MN-CDM625A