Comtech EF Data CDM-625A Installation And Operation Manual page 494

CDM-625A Advanced Satellite Modem
CDM-625A ODU (Transceiver, BUC, LNB) Operation
10.5.1.2.1.1 Home > Outdoor Unit (ODU) > CSAT-5060 > Up Converter
Settings 1/2, 2/2
After configuring the CDM-625A for L-Band operation, and when a Block Up
Converter (BUC) is installed, you may use this page to configure BUC operating
settings and to view the BUC operational status.
Open the Up Converter Settings 1/2 page or the Up Converter Settings2/2 page from the nested
CSAT-5060 submenu.
The Up Converter Settings 1/2 page contains the following options:
Hot
Dialog Window
Key
A Tx Frequency
B Tx Attenuation
C
Tx Slope Mode
D Tx Slope Value
The Up Converter Settings 2/2 page contains the following options:
Hot
Dialog Window
Key
A Tx Mute
B
Tx Amplifier
C Tx Gain Offset
Typical for either page, press a hot key to open a dialog window. Otherwise, press [ESC] to
return to the nested CSAT-5060 submenu.
Option Entry
Enter a value from 5845.000 to 6725.000 MHz
Enter a value from 0.00 to 25.00 dB
Use the ↑↓ arrow keys to select Manual or Calibrated
Enter a value from 0.0 to 1.0 units
Option Entry
Use the ↑↓ arrow keys to select Disabled or Enabled
Use the ↑↓ arrow keys to select Off or On
Enter a value from -4.00 to 0.00 dBm
10–58
Revision 0
MN-CDM625A