Odu | Enable - Comtech EF Data CDM-625A Installation And Operation Manual

CDM-625A Advanced Satellite Modem
CDM-625A ODU (Transceiver, BUC, LNB) Operation
10.4.2.4.1

ODU | Enable

Use this page to enable or disable communications with CSAT-5060 or KST-2000A/B ODUs for
70/140 MHz operation, or LPOD BUCs for L-Band operation (see Sect. 10.4.2.1 Configuration |
BUC (Block Up Converter)).
ODU Comms
Use the drop-down list to select ODU operation as Disabled or Enabled, and then click [Submit].
If you encounter a communications issue – e.g., an ODU is either physically not present or the
ODU Comms cable is not connected to the CDM-625A – the following error page displays after
clicking [Submit]:
Take steps to troubleshoot the ODU setup before attempting to enable ODU operations from
this page. See the pertinent ODU Installation and Operation Manual for further information.
Figure 10-8. ODU | Enable page
10–43
Revision 0
MN-CDM625A