Configuration | D&I (Drop And Insert) - Comtech EF Data CDM-625A Installation And Operation Manual

CDM-625A Advanced Satellite Modem
Ethernet-based Remote Product Management
7.5.4.3.8 Configuration | D&I (Drop and Insert)
•
For D&I configuration information: Chapter 6. FRONT PANEL OPERATION
For D&I functionality overview: Appendix E. CLOCK MODES
•
INSERT (D&I).
Figure 7-26. Configuration | D&I page (Selected Framing Mode = D&I)
The appearance of this page is dependent on the framing mode selected on the 'Configuration |
Modem' page (Sect. 7.5.4.3.1). If the selected framing mode is D&I++, the section heading and
the available parameters adjust accordingly:
If the selected framing mode is Quad Drop & Insert, the section heading and the available
parameters adjust accordingly:
Click [Submit] to save these settings.
7–54
Revision 0
MN-CDM625A
DROP AND
AND