Home > Modem > Carrier-In-Carrier (Cnc) - Comtech EF Data CDM-625A Installation And Operation Manual

CDM-625A Advanced Satellite Modem
Telnet Command Line Interface (CLI) Operation
9.3.3.4 Home > Modem > Carrier-in-Carrier (CnC)
Chapter 10. D
Open the Carrier-in-Carrier (CnC) page from the Modem submenu. This page contains the
following options:
Hot
Dialog Window
Key
A
CnC Mode
B CnC Search Min Delay
C CnC Search Max Delay
D
CnC Frequency Offset
E CnC PMSI Mode
Press a hot key to open a dialog window. Otherwise, press [ESC] to return to the Modem
submenu.
T C - -C
OUBLE ALK ARRIER IN ARRIER
Option Entry
Use the ↑↓ arrow keys to select:
• Off
• APC XBand Side A
• APC CBand Side B
• APC KaBand Side B
Enter a minimum value from 0 to 330 ms
Enter a maximum value from 0 to 330 ms
Enter a value from 1 to 200 KHz
Use the ↑↓ arrow keys to select Idle, Redundancy, Talk, or Listen
9–28
(C C) OPTION
N
• On Normal • APC CBand Side A
• APC KuBand Side A • APC KaBand Side A
• APC XBand Side B • APC KuBand Side B
Revision 0
MN-CDM625A