Select: Fast Menus; Fast: Options; Fast: Options  View Options - Comtech EF Data CDM-625A Installation And Operation Manual

CDM-625A Advanced Satellite Modem
Front Panel Operation
Depending on 70/140 MHz or L-Band operation: Use to monitor and control a standalone or
redundant Comtech EF Data RF Transceiver (CSAT-5060 or KST-2000A/B) or LPOD BUC if
connected.

6.2.8 SELECT: FAST Menus

The d isplay example a s s hown h ere d epicts a unit s hipped w ith th e T wo-
channel A udio D rop h ardware o ption i nstalled. I f th is h ardware i s not
included, 'Audio' does not appear on the bottom line.
FAST:
Baseboard S/N 123456789
FAST (Fully Accessible System Topology) allows you to enable new options in the modem. Use
◄ ► arrow keys to select Options, Demo-Mode, or CnC, and then press ENTER.
the
6.2.8.1

FAST: Options

FAST options:
Set Register1
You can access the FAST options via three separate internal EEPROM registers. Each register
requires its own FAST access code. Use the
Register1, or Set Register2, and then press ENTER.
6.2.8.1.1 FAST: Options  View Options
FAST: View options: 01
Use the arrow keys to scroll through the available options. The modem identifies each
▲▼
selected FAST option as "installed" or "not installed".
You must contact Comtech EF Data Product Support to purchase the FAST Access Code for the
desired option.
Available options include:
► Data Rate
► Data Rate when configured for TPC/LDPC
► Data Rate when configured for CnC (DoubleTalk Carrier-in-Carrier)
► Data Rate when configured for VersaFEC
► Symbol Rate when configured for IP-ACM
Options
View Options
Set Register2
Base 5 Mbps data rate installed
Demo-Mode CnC
HW Rev1.X Audio
◄ ► arrow keys to select View Options, Set
6–89
Revision 0
MN-CDM625A
()
()