Rear Panel; Figure 1-4. Cdm-625A Rear Panel View - Comtech EF Data CDM-625A Installation And Operation Manual

Advanced satellite modem (18 kbps – 25 mbps)
Hide thumbs Also See for CDM-625A:
Table of Contents

Advertisement

CDM-625A Advanced Satellite Modem
Introduction

1.3.10.3 Rear Panel

Chapter 3. REAR PANEL CONNECTORS
Figure 1-4 shows the rear panel of the modem. External cables are attached to connectors on
the rear panel of the CDM-625A. They comprise:
Connector Group
Name
(Chapter Sect.)
Rx
IF
(Sect. 3.2.1)
Tx
Data Interface
G.703
Data
Terrestrial Data
(Sect. 3.2.2)
10/100 Ethernet
IDR Data/Alarms/Audio
ESC
Remote Control
Alarms
Utility
PMSI
(Sect. 3.2.3
1:1 Control
External Reference
Ground
Ground / Power
AC Power (Standard)
(Sect 3.3)
DC Power (Optional)
The European EMC Directive 2004/108/EEC (EN 55022, EN 50024) requires using
properly shielded cables for DATA I/O. These cables must be double-shielded from
end-to-end, ensuring a continuous ground shield.
(TOP) Standard AC Chassis (CEFD P/N PL-0021325)
(BOTTOM) Optional 48V DC Chassis (CEFD P/N PL-0021327)

Figure 1-4. CDM-625A Rear Panel View

Connector Type
BNC female (70/140MHz band)
Type 'N' female (L-Band)
BNC female (70/140MHz band)
Type 'N' female (L-Band)
25-pin Type 'D' female
Balanced G.703
9-pin Type 'D' female
Auxiliary G.703
9-pin Type 'D' female
Unbalanced Out
BNC female
Unbalanced In
BNC female
IDI
BNC female
DDO
BNC female
(4X) RJ-45 female
44-pin High Density Type 'D' female
9-pin Type 'D' female
9-pin Type 'D' male
15-pin Type 'D' male
9-pin Type 'D' female
9-pin Type 'D' female
BNC female
#10-32 stud – See Sect. 3.3.1
See Sect. 3.3.2
See Sect. 3.3.3
1–12
PINOUTS
AND
Function
IF Input
IF Output
Serial synchronous data input/output
G.703, D&I or D&I++; Quad E1 Ports 1 & 2
Quad E1 Ports 3 & 4
Receive G.703 (IDO); ASI
Transmit G.703 (DDI); ASI
Insert Data In / Sub-rate Auxiliary Tx G.703 In
Drop Data Output / Sub-rate Auxiliary Rx
G.703 Out
10/100 BaseT management and data
Intelsat Open Network auxiliary signals
ESC input/output (RS232/485)
Serial Remote Interface (RS232/485)
Form C Alarms (relay closures)
Pre-Mapped Symbol Interface (CnC)
Connection to External 1:1 Controller
Input/output
Common Chassis Ground
Chassis power
Chassis power
Revision 0
MN-CDM625A

Advertisement

Table of Contents
loading

Table of Contents