Comtech EF Data CDM-625A Installation And Operation Manual page 378

CDM-625A Advanced Satellite Modem
Telnet Command Line Interface (CLI) Operation
The D&I++ Table dialog window shows the current value for the table. To edit the table
value, press A, and then enter a new value*. Press [ENTER] to accept the change or [ESC] to
return to the D&I dialog window.
* For correct syntax, see the DIC Command/Query Description of Arguments
column, SECT. D.5.5 Bulk Configuration Strings, page D-44 in APPENDIX D.
REMOTE CONTROL
• Hot Key [G] – D&I Quad Table
The D&I Quad Table dialog window shows the current value for each table. To edit a table
value*, press A (Quad Drop And Insert Port 1), B (Quad Drop And Insert Port 2), C (Quad
Drop And Insert Port 3), or D (Quad Drop And Insert Port 4).
* For correct syntax, see the QDI Command/Query Description of Arguments,
SECT. D.5.5 Bulk Configuration Strings, page D-45 in APPENDIX D. REMOTE
CONTROL
9–32
Revision 0
MN-CDM625A