Status | Modem Logs | Packet Processor - Comtech EF Data CDM-625A Installation And Operation Manual

Advanced satellite modem (18 kbps – 25 mbps)

Hide thumbs Also See for CDM-625A:

Table of Contents

CDM-625A Advanced Satellite Modem

Ethernet-based Remote Product Management

7.5.4.4.2.2 Status | Modem Logs | Packet Processor

This nested page is accessible only to Admin users and when the optional IP Packet

Processor card is installed and enabled

using conditional access pages.

This page provides you with a scrollable window showing the optional IP Packet Processor's

cumulative events, plus control over what information is displayed for IP Packet Processor

Figure 7-34. Status | Modem Logs | Packet Processor page

Event Logging

The Event Log can display a maximum of 256 events. Each event is assigned a sequential Index

number; its type, the date and time of occurrence, and a description of the event follows.

Logging On/Off – Select event logging as On or Off.

Logging Level – Use the drop-down list to select the type of information displayed in the log:

Errors Only, Errors and Warnings, or All Information.

Click [Submit] once the desired settings have been entered in this section.

Clear Event Log

Scroll through the Event Log as needed, and then click [Clear Log] to wipe the log clean. The

table will reset to a single event description – "Event log cleared."

for complete details about

Table of Contents