Config: Misc  Hirateesc - Comtech EF Data CDM-625A Installation And Operation Manual

Advanced satellite modem (18 kbps – 25 mbps)

Hide thumbs Also See for CDM-625A:

Table of Contents

CDM-625A Advanced Satellite Modem

Front Panel Operation

keys to change the value. The permitted range of the volumes is –6 dB to +8 dB, in 2 dB steps.

Press ENTER when done.

6.2.1.10.6 CONFIG: Misc  HiRateESC

High-Rate-ESC=Off (Off,On)

The ESC (Engineering Service Channel) is determined by the framing type (IBS, D&I, or ESC++)

selected under CONFIG: Mode. The High Rate IBS (Engineering Service Channel) requires the

Open Network FAST option. Both Tx and Rx Framing must be configured as IBS or D&I for this

feature to be enabled. When enabled, the lower of the Tx or Rx primary data rate limits the

maximum baud rate, in accordance with the following table:

Appendix P. OPEN NETWORK OPERATIONS

ESC++ is available as standard. Both Tx and Rx framing must be set to ESC++. When enabled, the

lower of the Tx or Rx primary data rate limits the maximum baud rate, in accordance with the

following table:

Appendix J. ESC++

arrow keys to select the parameter to edit, and then use the

select its setting. The available choices are as follows:

DataParityStop=8N1

Max ESC Baud Rate

Max ESC++ Baud Rate

arrow keys to

Chapters

Table of Contents