Home > Administration > Restore Factory Defaults - Comtech EF Data CDM-625A Installation And Operation Manual

CDM-625A Advanced Satellite Modem
Telnet Command Line Interface (CLI) Operation
9.3.2.7 Home > Administration > Restore Factory Defaults
Open the Restore Factory Default page from the Administration submenu. Use this page to
restore the CDM-625A settings to the original settings as shipped from the factory.
Hot
Dialog Window
Key
A
Restore Factory Defaults
Press [A] to open the Restore Factory Defaults dialog window. Otherwise, press [ESC] to return
to the Administration submenu.
By selecting Restore, the unit proceeds with restoration of factory defaults. Wait while the unit
reboots.
You must restart your Telnet CLI session upon reboot of the CDM-625A.
Option Entry
Use the ↑↓ arrow keys to set as Cancel (default) or Restore
9–21
Revision 0
MN-CDM625A