Comtech EF Data CDM-625A Installation And Operation Manual page 167

Advanced satellite modem (18 kbps – 25 mbps)

Hide thumbs Also See for CDM-625A:

Table of Contents

CDM-625A Advanced Satellite Modem

Front Panel Operation

CONFIG: IP  IP Setup  VLAN  PortMode

arrow keys to select Port1, Port2, Port3 or Port4, and then press ENTER.

CONFIG: IP  IP Setup  VLAN  PortMode  Port#

Port #: Port Mode= Trunk

Where # denotes the selected Port, use the

Then, use the

When Port Mode is selected as Trunk, VLAN ID (PVID) is not applicable. On the bottom line of

the display, the selected port's PVID will display as

Otherwise, when Port Mode set to Access, configure the VLAN IDs (PVIDs). To edit the PVID, first

arrow keys to select a digit to edit, and then use the

digit. Enter a PVID in the range from 0001 to 4095. The default is 0001.

Hold down the ▲ ▼ arrow keys to quickly scroll between 0001 and 4095.

CONFIG: IP  IP Setup  VLAN  VLAN-Table

View/Edit/Delete

The VLAN table supports up to 32 entries. Use the

or Add-Entry, and then press ENTER

CONFIG: IP  IP Setup  VLAN  VLAN-Table  View / Edit / Delete

VLAN ID:0001 P1:Filtered

To view, edit, or delete existing VLAN IDs, first use the

VLAN ID – Selects the tabulated VLAN ID. After selecting VLAND ID, use the

keys to scroll through the available VLAN IDs.

arrow keys to select Access or Trunk.

arrow keys to select the operation parameter.

arrow keys to select View/Edit/Delete

ACT=None(N,E,D)

arrow keys to select the desired

arrow keys to change that

Chapters

Table of Contents