Comtech EF Data CDM-625A Installation And Operation Manual page 596

CDM-625A Advanced Satellite Modem
Appendix F
F.6.8 CnC-APC Redundancy Support Notes
1. The CnC-APC feature fully supports 1:1 redundancy. Note that, as is required with standard
CnC 1:1 redundancy operation, a PMSI cable is required to connect the two units in a 1:1
pair.
2. At this time, 1:N redundancy in the CRS-300/CRS-500 is not yet supported – a firmware
update for these switches will be available in the future. Please consult Comtech EF Data
Technical Support for updated information.
Sect. 6.2.1.8.4 CONFIG: CnC  PMSI-Control (Chapter 6. FRONT PANEL
OPERATION)
F–28
Revision 0
MN-CDM625A