Creating A Sample Program Automatically - Yamaha RCX240 User Manual

10. "PROGRAM" mode
10.3.9

Creating a sample program automatically

1
This section explains the procedure of automatically creating a sample program for defining user
function keys which can be used in "MANUAL" and "PROGRAM" modes.
n
NOTE
Use caution when creating a sample program automatically, since previously
2
defined user function data will be rewritten.
Press
1
"PROGRAM>DIR>EXAMPLE" mode is entered, and a confirmation message appears on
3
the guideline.
4
5
Press
2
6
A sample program will be automatically created under the program name "FUNCTION".
Press
Rewrite the contents of this created program as needed.
3
7
User function keys can be customized with this program.
n
NOTE
Refer to "10.2.6 User function key display" for details on user function keys. Refer to
"10.6 Registering user function keys" when registering user function keys.
8
9
10
4-78
Chapter 4 OPERATION
(EXAMPLE) in "PROGRAM>DIR" mode.
Loading a sample program
(YES) to perform this operation.
(NO) if you want to cancel this operation.