12.5.4
Displaying the total operation time
Use the following procedure to check the total controller operation time.
Press
(TOTAL) in "SYSTEM>DIAGNOS" mode.
1
The total controller operation time is displayed.
Displaying the total operation time
The 3rd line shows the date and time that the total operation time was reset.
The "Power-on time" is the total time that the controller power has been on.
The "Run time" is the total time that the controller has performed automatic operation.
To reset the total operation time, press
2
The display shows the new total operation time starting from the date and time after
reset.
Press
to return to "SYSTEM>DIAGNOS" mode.
3
12. "SYSTEM" mode
(CLEAR).
Chapter 4 OPERATION
1
2
3
4
5
6
7
8
9
10
4-299