Club Car 2009-20011 Electric Precedent Maintenance And Service Manual page 47

BODY AND TRIM
K-00504.eps
3. With the aid of an assistant, position the canopy (13) to the top of the front supports (8 and 9) and rear supports
(1 and 2).
4. Secure the front canopy brackets (under the canopy) (14) to the front supports (8 and 9) with four 1/4-20 x
1-1/2 hex head bolts (15), eight 1/4-inch flat washers (16) and four 1/4-20 nylon lock nuts (17). Tighten the
hardware to 80 in-lb (9 N·m).
5. Secure the rear of the canopy (13) to each rear canopy support (1 and 2) with four M6-1.0 x 25 flanged head
bolts (18). Tighten the hardware to 80 in-lb (9 N·m).
6. At the bottom of the front supports (8 and 9), tighten the four M8-1.25 x 65 torx button-head bolts (10) to 18.4
ft-lb (25 N·m).
7. Secure each front support cover (11) with one M6 hex-head screw (12). Tighten the hardware to 31 in-lb (4.6 N·m).
8. Secure the tube plugs (19) into the end of each canopy support (1 and 14).
Figure 4-15 Properly Orient the Front Supports
2009-2011 Electric Precedent Maintenance and Service Manual
Canopy (Monsoon Version) – Four-Passenger
4
Page 4-23