Write Settings To Controller - Club Car 2009-20011 Electric Precedent Maintenance And Service Manual

IQ DISPLAY MODULE (IQDM) AND IQDM-P
DIAGNOSTICS: EXCEL SYSTEM
10. With the controller settings stored in the memory of the handset, the handset can be used to transfer all of the
desired speed controller settings to any Excel System vehicle or group of Excel System vehicles. See Speed
Controller Cloning – Transferring Settings from the Handset to the Vehicle on page 16-15.
696
Figure 16-4 Handset Executing

WRITE SETTINGS TO CONTROLLER

This function transfers all of the speed controller settings (except for "private speed mode") from the handset to the
vehicle speed controller. This enables the trained technician to "clone" a speed controller. Once the speed controller
settings have been transferred to the handset, the technician can then connect the handset to another vehicle and
transfer the stored settings into the speed controller.
Speed Controller Cloning – Transferring Settings from the Handset to the Vehicle
1. Perform this procedure with a handset that has the desired speed controller settings. See Speed Controller
Cloning – Transferring Settings from the Vehicle to the Handset on page 16-14.
2. Locate a vehicle that does not have the desired speed controller settings.
3. Turn the key switch to the OFF position, place the Forward/Reverse handle in the NEUTRAL position, and
lock the park brake.
4. Plug the handset into the vehicle.
4.1. Connect one end of the cable to the port located on the bottom of the handset.
4.2. Connect the cable adaptor to the IQDM cable.
4.3. Remove the dust cap from the IQDM port.
4.4. Align the keyed portion of the plug with the IQDM port and connect the plug to the port (Figure 16-1,
Page 16-1).
697
2009-2011 Electric Precedent Maintenance and Service Manual
Functions Menu
Figure 16-5 Confirmation Message
16
Page 16-15