Accelerator Pedal Removal; Accelerator Pedal Installation; Brake Pedal Removal; Brake Pedal Installation - Club Car 2009-20011 Electric Precedent Maintenance And Service Manual

5

Accelerator Pedal Removal

ACCELERATOR PEDAL REMOVAL
1. Remove pedal group from vehicle. See Pedal Group Removal on page 5-1.
2. Vehicles with an MCOR: Remove the MCOR. See MCOR Removal on page 17-8.
3. Remove debris shields (4 and 5) (Figure 5-5, Page 5-7).
4. Remove four screws (13) securing accelerator pedal assembly (9) to pedal group mounting plate and pull
accelerator pedal assembly through bottom of pedal group mounting plate.

ACCELERATOR PEDAL INSTALLATION

1. Insert accelerator pedal assembly (9) through bottom of pedal group mounting plate and secure with four screws
(13) (Figure 5-5, Page 5-7).
2. Tighten screws (13) to 38 in-lb (4.3 N·m)
3. Install debris shields (4 and 5).
4. Vehicles with an MCOR: Install the MCOR. See MCOR Installation on page 17-8.
5. Install pedal group in vehicle. See Pedal Group Installation on page 5-3.

BRAKE PEDAL REMOVAL

1. Remove pedal group from vehicle. See Pedal Group Removal on page 5-1.
2. Remove debris shields (4 and 5) (Figure 5-5, Page 5-7).
3. Remove four screws (12) securing brake pedal assembly (10) to pedal group mounting plate and pull brake pedal
assembly through bottom of pedal group mounting plate.

BRAKE PEDAL INSTALLATION

1. Insert brake pedal assembly (10) through bottom of pedal group mounting plate and secure with four screws (12)
(Figure 5-5, Page 5-7).
2. Tighten screws (12) to 100 in-lb (11.3 N·m)
3. Install debris shields (4 and 5).
4. Install pedal group in vehicle. See Pedal Group Installation on page 5-3.
Page 5-6 2009-2011 Electric Precedent Maintenance and Service Manual
ACCELERATOR AND BRAKE PEDAL GROUP