Leaf Spring Installation (Two-Passenger Vehicles) - Club Car 2009-20011 Electric Precedent Maintenance And Service Manual

REAR SUSPENSION
682
Figure 9-1 Support Vehicle on Jack Stands

LEAF SPRING INSTALLATION (TWO-PASSENGER VEHICLES)

1. To install the springs, reverse the removal procedure. See following CAUTION.
CAUTION
• When positioning the spring on the transaxle, be sure to insert the locating bolt on the spring in the
locating hole in the transaxle saddle.
2. Tighten the nuts on the U-bolts to 25 ft-lb (34 N·m) and tighten nuts (2) on spring mounting bolts (17) to 15 ft-lb
(20.3 N·m) (Figure 9-3, Page 9-4).
3. Install tire and wheel assembly. See Wheel Installation, Section 8, Page 8-1.
4
651
2009-2011 Electric Precedent Maintenance and Service Manual
Leaf Springs (Two-Passenger Vehicles)
Figure 9-2 Disconnect Brake Cable
9
2
3
1
Page 9-3