Section 22 - Iq Display Module Programmer (Iqdm-P): Iq System; Plugging The Handset Into The Vehicle - Club Car 2009-20011 Electric Precedent Maintenance And Service Manual

SECTION 22 – IQ DISPLAY MODULE PROGRAMMER (IQDM-P):
IQ SYSTEM
DANGER
• See General Warnings on page 1-1.
WARNING
• See General Warnings on page 1-1.
NOTE: For information pertaining to the introductory display, menu navigation, and monitor, faults and function menus,
see IQ Display Module (IQDM) and IQDM-P Diagnostics: IQ System on page 15-1.
The information presented in this section addresses the series 2 versions of the IQDM-P and IQDM handsets.

PLUGGING THE HANDSET INTO THE VEHICLE

1. Connect one end of the cable to the jack located on the bottom of the handset.
2. Connect the cable adaptor to the IQDM cable.
3. Find the IQDM jack on the vehicle (Figure 22-1, Page 22-1).
4. Remove the dust cap from the IQDM jack.
5. Align the keyed portion of the plug with the IQDM jack and connect the plug to the jack.
694
Figure 22-1 IQDM Port Under Instrument Panel
2009-2011 Electric Precedent Maintenance and Service Manual
22
Page 22-1