Functions Menu; Get Settings From Controller - Club Car 2009-20011 Electric Precedent Maintenance And Service Manual

IQ DISPLAY MODULE (IQDM) AND IQDM-P
DIAGNOSTICS: IQ SYSTEM

FUNCTIONS MENU

The functions menu is accessed by using the up or down arrow to scroll to functions and pressing the right arrow
key to activate the menu.

GET SETTINGS FROM CONTROLLER

This function transfers all of the speed controller settings (except for "private speed mode") from the vehicle speed
controller to the handset. This enables the trained technician to "clone" a speed controller. Once the speed controller
settings have been transferred to the handset, the technician can then connect the handset to another vehicle and
transfer the stored settings into the speed controller.
Speed Controller Cloning – Transferring Settings from the Vehicle to the Handset
1. Locate a vehicle that has the desired speed controller settings.
2. Turn the key switch to the OFF position, place the Forward/Reverse handle in the NEUTRAL position, and
lock the park brake.
3. Plug the handset into the vehicle.
3.1. onnect one end of the cable to the port located on the bottom of the handset.
3.2. Connect the cable adaptor to the IQDM cable.
3.3. Remove the dust cap from the IQDM port.
3.4. Align the keyed portion of the plug with the IQDM port and connect the plug to the port (Figure 15-1,
Page 15-2).
4. Scroll to the functions menu and select.
5. Select settings.
6. Select get settings from controller.
7. Press + on the change value button to confirm the operation.
8. The handset will display an "executing..." message for the next few seconds while the controller settings are being
stored in the handset's memory (Figure 15-3, Page 15-14).
9. When the handset is finished recording the speed controller settings, a confirmation message is displayed
(Figure 15-4, Page 15-14).
10. With the controller settings stored in the memory of the handset, the handset can be used to transfer all of
the desired speed controller settings to any IQ System vehicle or group of IQ System vehicles. See Speed
Controller Cloning – Transferring Settings from the Handset to the Vehicle on page 15-14.
2009-2011 Electric Precedent Maintenance and Service Manual
15
Functions Menu
Page 15-13