Reset All Settings - Club Car 2009-20011 Electric Precedent Maintenance And Service Manual

16
Functions Menu
5. Scroll to the functions menu and select.
6. Select settings.
7. Select write settings to controller.
8. Press + on the change value button to confirm the operation.
9. The handset will display an "executing..." message for the next few seconds while the controller settings are being
stored in the handset's memory (Figure 16-4, Page 16-15).
10. When the handset is finished transferring the speed controller settings, a confirmation message is displayed
(Figure 16-6, Page 16-16).
11. Repeat this procedure for additional vehicles that need to be programmed with the same handset settings.
698
Figure 16-6 Confirmation Message

RESET ALL SETTINGS

In the event that a mistake was made and one or more changes should not have been made with the handset, the
speed controller settings can be reverted to the original settings from the beginning of the session (when the handset
was plugged into the vehicle). This function is similar to the "undo" command on a PC and will work correctly only
when the handset has not been unplugged and power to the speed controller has not been interrupted.
Resetting All Settings
1. During an active session when the settings need to be returned to the original values (the values that were active
at the beginning of the session), scroll to the functions menu and select.
2. Select settings.
3. Select reset all settings.
Page 16-16 2009-2011 Electric Precedent Maintenance and Service Manual
IQ DISPLAY MODULE (IQDM) AND IQDM-P
DIAGNOSTICS: EXCEL SYSTEM
699
Figure 16-7 Confirmation Message