Menu Navigation - Club Car 2009-20011 Electric Precedent Maintenance And Service Manual

15

Menu Navigation

• Faults
• Functions
• Information
• Programmer Setup
In the event that the handset does not display any information, or the screen is difficult to read, refer to the
IQDM troubleshooting procedures. See IQDM and IQDM-P Handset Troubleshooting on page 15-18.
694
Figure 15-1 IQDM Port Under Instrument Panel
MENU NAVIGATION
The NAVIGATION BUTTON (1) is the four-arrow button located on the left side of the handset (Figure 15-2, Page
15-3). This button is used to navigate through and select menus. Pressing the up or down arrows allows the user to
scroll through the menu items. When the box beside the desired menu is blinking, pressing the right arrow selects that
menu item. Pressing the left arrow allows the user to go back one screen (2).
The CHANGE VALUE BUTTON (3) is the button located on the right side of the handset (Figure 15-2, Page 15-3).
This button allows the user to change values by pressing + or –.
The three yellow buttons labeled 1, 2 and 3 are BOOKMARK BUTTONS (4) (Figure 15-2, Page 15-3). These buttons
allow the user to bookmark up to three specific screens for rapid return to those screens. To bookmark a specific
display screen, have the desired screen displayed and simply press and hold a bookmark button until the statement
"bookmark set" is displayed. When it is necessary to go back to the bookmarked screen, rapidly press and release the
appropriate bookmark button. See following NOTE.
NOTE: When going to a bookmarked display screen, be sure to rapidly press and release the button. If the button is
pressed and held for too long, the bookmark will be overridden with the current screen.
Page 15-2 2009-2011 Electric Precedent Maintenance and Service Manual
IQ DISPLAY MODULE (IQDM) AND IQDM-P
DIAGNOSTICS: IQ SYSTEM