Club Car 2009-20011 Electric Precedent Maintenance And Service Manual page 225

EXCEL SYSTEM TROUBLESHOOTING – TPS
4.4. If reading is still not obtained, go to the CDM Troubleshooting Guide on page 13-38.
Once a value has been obtained in the display window, the CDM may be removed from its receiving position and
the data reviewed. The CDM will hold the values for F1, F2, F3, and F4 until the CDM is turned OFF or it receives
another line of data from the same or another onboard computer. Use the following procedure to review the data
stored in the CDM:
• The value currently displayed will be F1 (battery voltage).
• To view F2, press and hold the button on the CDM. When "Func 2" appears in the display window, release the
button. The value for F2 will then be displayed.
• To view F3, press and hold the button on the CDM until "Func 3" appears in the display window. Release the
button. The value for F3 will be displayed.
• To view F4, press and hold the button on the CDM until "Func 4" appears in the display window. Release the
button. The value for F4 will be displayed.
NOTE: The values of all four functions can be recalled by pressing and releasing the CDM button.
2009-2011 Electric Precedent Maintenance and Service Manual
Communication Display Module (CDM)
13
Page 13-37