Club Car 2009-20011 Electric Precedent Maintenance And Service Manual page 46

4
Canopy (Monsoon Version) – Four-Passenger
1
6
K-00538.eps
2. Attach the front canopy supports.
2.1. Ensure the front supports are properly oriented to the correct side of the vehicle as shown (Figure 4-15).
The lower profile of each support follows the profile of the vehicle. If the supports are placed on the wrong
side of the vehicle, they will not follow the vehicle's profile.
2.2. Align the holes in the lower portion of each front support (8 and 9) with the corresponding holes in the
vehicle (Figure 4-16). Insert two M8-1.25 x 65 torx button-head bolts (10) through each front support into
the threaded holes in the vehicle. The bolts are color-coded with gold thread lock. Only finger-tighten
the bolts at this time.
2.3. Slide the front support covers (11) over the front supports (8 and 9). The covers are marked DRIVER and
PASS to identify them as going on the driver side or passenger side respectively (Figure 4-16). Do not
install the M6 hex-head screws (12) yet.
Page 4-22 2009-2011 Electric Precedent Maintenance and Service Manual
Figure 4-14 Secure Rear Supports to Seat Support Bracket
1
4
BODY AND TRIM