Slow Pedal Up; Ksi Sro Enable; M2 Max Speed - Club Car 2009-20011 Electric Precedent Maintenance And Service Manual

Iq system and excel system vehicles
Table of Contents

Advertisement

IQ DISPLAY MODULE PROGRAMMER
22
Program Menu
(IQDM-P): IQ SYSTEM

SLOW PEDAL UP

slow pedal up is an option that toggles either on or off. With the slow pedal up parameter turned off, downhill speed
with the pedal up will be maintained at 11.3 mph (18.2 kph). Turned on, this parameter maintains pedal up, downhill
speed at 10.4 mph (16.8 kph).

KSI SRO ENABLE

The ksi sro enable (key switch static return to off) option toggles either on or off. With this menu item enabled, the
vehicle will not operate if the key switch is on after the car is charged or the run/tow switch is cycled. The vehicle will be
disabled when the controller is powered up with the key switch on and after any of the following events have occured:
1. the run/tow switch had been placed in the tow position, 2. the DC plug of the charger had been plugged into the
vehicle, 3. the battery set had been disconnected or 4. if the vehicle had gone into sleep mode and the accelerator
was pressed while the key switch was switched on. The KEY SWITCH SRO fault detect that is controlled by the
ksi sro enable parameter is disabled (off) by default.

M2 MAX SPEED

The m2 max speed option allows for adjustability of the SPEED 2 speed setting. From the factory, the vehicle can
be set to one of four standard SPEED 2 speed settings. The four speed settings are 11.4, 12.4, 13.2 and 14.0 mph
(18.4, 20.0, 21.3 and 22.6 km/h, respectively). The default SPEED 2 speed setting is 13.2 mph (21.3 km/h). The top
speed of the vehicle can be set between 11.2 to 14.8 mph in 0.2 mph (18.1 to 23.9 km/h in 0.3 km/h) increments.
(The IQDM displays mph as "%").
Page 22-4
2009-2011 Electric Precedent Maintenance and Service Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents