Leading Edge Skew Adjustment - Minolta CF2002 Service Manual

(8)

Leading Edge Skew Adjustment

This adjustment must be made in the following case:
• Leading edge skew occurs.
• The LPH Assy Bk has been replaced.
Adjustment Procedure
1. Call the Tech. Rep. Mode to the screen.
2. Touch these keys in this order: "Machine Adjust" → "Color Shift Correction."
3. Select "SINGLE."
4. Press the Start key to let the copier produce a test pattern.
5. Fold the test pattern in half lengthwise.
6. Check black lines A and B for deviation.
7. If there is any deviation touch the "Black" key and change the setting using the Up/
Down key.
Setting Instructions
Check point A,B
Direction of C
A
• If the lines deviate in the C direction,
decrease the setting.
• If the lines deviate in the D direction,
B
increase the setting.
C4025o310AA
A
B
C4025o311AA
D-53
Direction of D
A
B
C4025o312AA