Minolta CF2002 Service Manual page 171

RD Mode
• Make the settings necessary when a Data Terminal is mounted. (For details, see Service
Manual for Data Terminal.)
Item
To select the type of
e-mail / Modem
the RD system.
To register the Tech.
Rep. ID code and per-
form a maintenance
ID Code
start transmission.
To make the DT set-
ting and perform the
initial transmission.
DT
Setting
To set the date and
Date/Time
time-of-day.
Input
To set tone or pulse
Common DT and automatic recep-
tion.
To clear the data for
RAM Clear the Center.
Purpose
Select either "e-mail" or "Modem."
Enter a 7-digit code from the 10-Key Pad
(0000001 to 9999999).
<Registration>
When the ID code is entered, it is registered.
<Maint. Start>
Touch the ID Code Key.
<DT Setting>
Set "Password," "DT-ID," and "TEL No."
When "e-mail" is selected for the ID Setting,


TEL No. is the e-mail address.
<Initial Transmission>
Press the Initial Transmission key to execute the
initial transmission to the Center and the copier
equipped with the Data Terminal is registered
with the Center (only if "Modem" is selected for
"System Selection").
Enter the date (month, day, and year) and time-
of-day from the 10-Key Pad. Pressing the Set
key will start the clock.
The default settings are tone and disable auto-
matic reception.
The following types of data are cleared:
• ID Code, DT Setting, Date/Time Input, and
Common DT.
S-38
Setting/Precautions