Item
To set the type of the con-
troller.
Peripheral
Setting
When setting up the con-
troller
• To select who is to
replace a unit.
• When the unit life arrives,
the warning display is
intended for the specific
person who is going to
Unit Change
replace the unit.
• When "User" is selected:
Copying is inhibited.
• When "Service" is
selected: Life warning.
Upon setup
To select whether to display
Memory
the option of "Memory
Recall
Recall" for "User's Choice
1" of "Utility."
To configure the copier as
Hard Disk
necessary when a hard
disk is mounted.
Purpose
See the Setup Instructions for the Controller.
The following are the default settings:
Toner Cartridge: User
Waste Toner Bottle: Service
Fusing Unit: Service
Imaging Unit: Service
Transfer Roller Unit: Service
Paper Powder Filter/Ozone Filter: Service
Punch Scraps Box: Service
The default setting is Enable.
The default setting is Unset.
S-30
Setting/Precautions
Enable
Disable
Set
Unset