(11) PRT Max Density
This adjustment must be made in the following case:
• An image quality problem is not corrected even after Gradation Adjust has been run.
Adjustment Procedure
1. Call the Tech. Rep. Mode to the screen.
2. Touch these keys in this order: "Image Adjust" → "PRT Max Density."
3. Select the color to be adjusted.
4. Enter the new setting from the 10-Key Pad.
• To increase the maximum amount of toner sticking, increase the setting value.
• To decrease the maximum amount of toner sticking, decrease the setting value.
5. Touch "END" to return to the "Image Adjust" menu screen.
6. Touch "Stabilizer."
7. Touch "Stabilizer Mode."
8. Press the Start key to validate the adjustment value.
9. Check the copy image for any image problem.
D-56