4-3.
FLASH MEMORY
• Firmware is upgraded by means of the memory card (IC card).
NOTE
• NEVER remove or insert the memory card with the copier power turned ON.
1. With the Power Switch in the OFF position, unplug the power cord from the power out-
let.
4. Plug the power cord into the power outlet and turn ON the Power Switch.
Three different types of F/W appear on the Touch Panel.
MSC
IR
Image Processing Board PWB-C
PRT
2. Remove one screw and the metal Blanking Plate.
4025D110AA
3. Insert the memory card into the slot.
4025D111AA
5. Select the particular type of F/W to be updated.
4025P036CB
Image Control Board PWB-F
PIC Board PWB-PIC
D-72