(12) PRT Highlight
This adjustment must be made in the following case:
• An image quality problem is not corrected even after Gradation Adjust has been run.
Adjustment Procedure
1. Call the Tech. Rep. Mode to the screen.
2. Touch these keys in this order: "Image Adjust" → "PRT Highlight."
3. Select the color to be adjusted.
4. Enter the new setting from the 10-Key Pad.
• To make the Highlight portion darker, increase the setting value.
• To make the Highlight portion lighter, decrease the setting value.
5. Touch "END" to return to the "Image Adjust" menu screen.
6. Touch "Stabilizer."
7. Touch "Stabilizer Mode."
8. Press the Start key to validate the adjustment value.
9. Check the copy image for any image problem.
D-57