(3)
Removal of the Scanner Drive Cables
1. Remove the IR RearCover.
2. Remove four screws and Control Panel.
4025D042AA
3. Remove the holding bracket and flat cable.
4025D041AB
4. Remove four screws and the control panel base.
4025D040AA
5. Remove the IR Front Cover.
6. Remove the Original Glass.
7. Remove 14 screws and the Optical Cover.
4025E006AB
8. Remove the Scanner Assy.
D-20
9. Remove the IR Right Cover and the IR Left
Cover.
10. Unhook the springs of the Scanner Drive Cables
on the hook side, one each at the front and in the
rear.
4002D110AB
D-21