Replacing Of The Separator Roll Assy - Minolta CF2002 Service Manual

(4)

Replacing of the Separator Roll Assy

3. Using a soft cloth dampened with alcohol, wipe
the Paper Separator Roll clean of dirt.
4658D006AA
1. Slide out the drawer.
2. Remove two screws and the Paper Separator
Roll mounting bracket assy and reinforcement
plate.
NOTES
• Receive by hand the reinforcement plate that will
come off position when the screws are removed.
4025E001AA
• When reinstalling the reinforcement plate, make
sure that it is doweled into position.
3. Take off the rubber stopper, shaft, spring, and
guide plate to remove the Paper Separator Roll
fixing bracket assy.
4658D003AA
4. Snap off one E-ring and the Paper Separator Roll
Assy.
5. Remove the Paper Take-Up Roll. [See (2)
Replacement of the Paper Take-Up Roll.]
6. To reinstall, reverse the order of removal.
7. Select "Tech. Rep. Mode"
and clear the count of "1st."
4658D004AA
E-6
→ →
"Counter" "Life"