Minolta CF2002 Service Manual page 72

10. Remove 11 screws and lift the PWB box upward
and off the copier.
4025D019AA
11. Disconnect connectors, terminals, and flat cable
from the High Voltage Unit (Image Transfer, Neu-
tralizing).
12. Remove six screws and the High Voltage Unit
(Image Transfer, Neutralizing).
4025D020AA
13. Disconnect connectors, terminals, and flat cable
from the High Voltage Unit (PC Drum CH.).
14. Remove two screws. Then, lift the High Voltage
Unit (PC Drum CH.) and take it out to the front.
4025D021AA
15. Disconnect the connectors and flat cable from the
High Voltage Unit (Developing Bias).
16. Remove two screws. Then, lift the High Voltage
Unit (Developing Bias) and take it out to the front.
4025D022AA
17. Slide out the paper drawer.
18. Remove two screws, unplug the connector, and
remove the Paper Size Detecting Board.
4025D023AA
D-14