(16) Printer Monocolor: uneven density in CD
<Troubleshooting Procedure>
Section
Step
IU
1
The surface of the PC Drum is
scratched.
2
Dirty on the outside.
LPH Assy
3
The surface of the lens array is
dirty.
Image
4
Image Transfer Belt Unit
Transfer
makes positive contact with
Belt Unit
plates on rails.
5
Cam gear operates properly.
6
The problem has been elimi-
nated through the checks of
steps up to 5.
<Typical Faulty Images>
4011T032AA
Check Item
T-90
4011T043AA
Result
Action
YES
Change IU.
YES
Clean.
YES
Clean with cleaning jig.
NO
Check and correct contacts.
NO
Change Image Transfer Belt
Unit.
NO
Change IU.
→
Change Image Transfer
Belt Unit.
→
Change High Voltage Unit
(Developing Bias).
→
Change High Voltage Unit
(Image Transfer, Neutralizing).