Replacing The Waste Toner Bottle - Minolta CF2002 Service Manual

(15) Replacing the Waste Toner Bottle

NOTES
• If a Finishing Option is installed, remove if from the Main Unit before trying to replace the
Waste Toner Bottle.
• When removing the Finishing Option, support the Horizontal Transport Unit with your
hand to prevent if from dropping.
1. Turn OFF the main switch.
2. Open the Left Door.
3. Grasp the handle, and remove the waste toner
bottle.
NOTES
• Raise the waste toner bottle gently before remov-
ing it.
4004D221AA • If scattered toner has accumulated in the vicinity of
the toner collecting port, do not tilt the waste toner
bottle when removing it.
• Do not leave the waste toner bottle in a tilted condi-
tion after removing it.
4. Remove the seals from the two toner collecting
ports.
4025E008AA
5. Peel off the seals for blocking the two toner col-
lecting ports, and place them over the toner col-
lecting ports.
4025E007AA
6. Clean the surface around the waste toner collect-
ing port. [See (16) Cleaning of the Area around
the Waste Toner Collecting Port.]
7. Remove the waste toner bottle from its box, and
remove the packing material.
8. Grasp the handle, and set the waste toner bottle
in place.
4025E009AA
E-13