Removal Of The Lph Unit - Minolta CF2002 Service Manual

(2)

Removal of the LPH Unit

1. Open the Front Door.
2. Slide out the IU (C, M, Y, Bk).
NOTES
• After the IU has been pulled out, place the IU lock lever back into the locked position.
• When installing the Imaging Unit into the main unit, make sure that the Toner supply
shutter is opened if the Imaging Unit Lower Cover is not used.
3. Removed the Rear Left Cover.
A
B
4. Remove five screws and the harness protective
metal bracket.
4004D229AA
5. Remove two screws and unplug one connector
on the PIC Board.
4025D142AA
6. Unplug four connectors from the IO Board.
7. Disconnect two hookup connectors.
4025D031AB
NOTE
• When unplugging the connector, make sure that
connector A (on the copier side) is disconnected.
Connector B (on the LPH Unit side) should not be
disconnected.
40004D232AA
D-17