Setting In The Utility Mode - Minolta CF2002 Service Manual

2-3.

Setting in the Utility Mode

Input
Item
To register the copy
mode functions or
scanner mode func-
tions (when a printer
controller is mounted)
Reset Mode set when the copier is
initialized.
To register the copy
mode functions being
currently set as a job
Job Memory
program or check or
Input
delete a job program
that has previously
been registered.
Meter Count
Purpose
To check the count of each counter or
print a list of counters.
Purpose
"Set-up Mode"
• The copy mode or scanner mode functions set
arbitrarily on the panel are registered.
"Factory Default"
• The factory-set copy mode or scanner mode
functions are registered.
• The copier is initialized at the following timings:
The Power Switch is turned ON.


Panel is reset.


An Interrupt mode is canceled.


• Up to ten different job programs can be regis-
tered.
• "Copy Program Recall" as a Utility function is
used to call up a program.
• To print the list, load the 1st Drawer with A4
lengthwise or Letter lengthwise paper.
• The copier rejects the print cycle if the drawer is
loaded with paper of any other size.
S-7
Setting/Precautions
Setting/Precautions