Replacing Of The Paper Dust Remover; Cleaning Of The Transport Roller; Cleaning Of The 2Nd Image Transfer Entrance Upper Guide - Minolta CF2002 Service Manual

(7)

Replacing of the Paper Dust Remover

(8)

Cleaning of the Transport Roller

(9)

Cleaning of the 2nd Image Transfer Entrance Upper Guide

1. Open the Right Door.
2. Pushing the hook with a blue label inward,
remove the Paper Dust Remover.
3. Remove the Ozone Filter. [See (17) Replace-
ment of the Ozone Filter.]
4. To reinstall, reverse the order of removal.
5. Select "Tech. Rep. Mode"
and clear the count of "Paper Powder Filter/
4004D206AB
Ozone Filter."
1. Open the Right Door.
2. Using a soft cloth dampened with alcohol, wipe
the Transport Roller clean of dirt.
4025E053AA
1. Open the Right Door.
2. Open the Left Door.
3. Remove the Waste Toner Bottle.
4. Slide the Transfer Belt Unit out halfway.
5. Wipe the 2nd Image Transfer Entrance Upper
Guide clean of dirt using a soft cloth.
NOTE
4025E055AA
• When cleaning, use care not to be hurt by the
leading edge of the guide that is sharp.
E-8
→ →
"Counter" "Life"