(2)
Removal of the Imaging Unit Motor C/M/Y/Bk
1. Remove the Rear Upper Cover.
2. Remove the Rear Left Cover.
3. Remove the Rear Right Cover.
4. Remove five screws and the harness protective
metal bracket.
4025D015AA
5. Remove three screws, unplug three connectors,
and remove the rear left metal bracket.
4025D017AA
6. Unplug all connectors of the IO Board.
7. Unplug two connectors of the Option Interface
Board.
8. Unplug two connectors of the PIC Board.
4025D016AA
9. Remove two screws and the power line mounting
bracket for the 2nd Drawer.
4025D018AA
10. Remove 11 screws and lift the PWB box upward
and off the copier.
4025D019AA
D-29