Minolta CF2002 Service Manual page 146

Expert Mode
Item
To fine-adjust density of
Thick Paper printed images of each color
and OHP Film for thick paper and OHP trans-
Image Density parencies.
Color Shift To make an automatic or man-
Correction (C) ual correction of color shift.
Color Shift
Correction (M)
Color Shift
Correction (Y)
Color Shift
Correction
(Bk)
Purpose
The fine-adjustment can be made over a
range of a total of five steps, two darker
levels and two lighter levels around the
standard central level. (This setting is not
affected by image stabilizer control.)
(Automatic correction)
• Pressing the Start key will let the copier
produce a test pattern according to the
current color shift condition.
(Manual correction)
• Check the test pattern for color shift
amount in each of the X, Y, and ? direc-
tions, and fine-adjust using the Up/
Down key.
• Fine-adjust in X and Y directions for
color shift of cyan, magenta, and yellow.
• For color shift of black, adjust tilt in the
black line on the leading edge in ? direc-
tion.
Since the test pattern is produced on


A3L or 11 × 17, or A4C or 8-1/2 × 11,
the press of the Start key will not be
accepted unless the paper source is
loaded with any of these paper sizes
(the Start key lighting up red).
S-13
Setting/Precautions