Minolta CF2002 Service Manual page 162

System Input
Item Purpose
To make the various
settings (language,
paper size, fixed
zoom ratios, etc.)
Marketing
according to the
Area
applicable marketing
area.
Upon setup


To let the copier rec-
ognize an optional
Original Size Detect-
Org. Detect
ing Sensor when one
Option Sensor
is mounted.
When an optional


sensor is mounted.
To register the serial
numbers of the
copier and options.
The numbers will be
printed on the list
Serial # Input
output.
Upon setup.


When the IR Unit


is replaced.
To enter the tele-
phone number of the
service contact that
will appear on the
Tel. # Input
Touch Panel when a
malfunction occurs in
the copier.
Upon setup.


To set the size for
FLS paper.
Upon setup.
FLS Paper


When the FLS


paper size is
changed.
To change the cen-
ter erase width in
Book Erase
Book copying.
(Center)
As required by the


user.
Setting/Precautions
Select the applicable marketing area and touch
"END" to set the marketing area.
MSJ
After the optional Original Size Detecting Sensor
has been mounted, select "Set."
Set
After the sensor has been mounted, perform "Org.
Detect Sensor" of "Machine Adjust."
• The IR and printer have been separately adjusted
and it is necessary to load the adjustment and
other data of the IR side when the IR is con-
nected to the printer.
• The data is loaded at the timing when the Power
Switch is turned OFF and ON after the IR serial
number has been entered and "END" has been
touched on the "Serial # Input" screen.
Enter the telephone number (19 digits) from the 10-
Key Pad. Use the Interrupt key to enter a hyphen
"-."
Select the size from among the following four.
F: 330.2 mm F: 330 mm F: 330.2 mm F: 330 mm
C: 203.2 mm C: 210 mm C: 215.9 mm C: 220 mm
The setting range is 2 to 30 mm, with 15 mm being
the default.
S-29
MC ME
Unset