(8)
Removal of Toner Replenishing Motor Y/M
(9)
Removal of the 2nd Image Transfer Pressure/Retraction Motor
1. Remove the Toner Hopper.
D-16
2. Unplug one connector.
3. Remove two screws and the Front Door Switch
Assy.
4025D050AA
4. Remove one screw and the gear.
4025D055AA
5. Remove two screws. Then, turn the Toner
Replenishing Motor Y/M counterclockwise and
take it off the copier.
4025D061AA
1. Open the Right Door.
2. Unlock the tab and remove the Transport Unit
Assy.
4025D062AA
3. Remove four screws, unplug one connector, and
remove the gear assy and motor assy.
4025D063AA
D-34