(2)
Replacing the Image Transfer Belt Unit
Removal Procedure
NOTES
• If a Finishing Option is installed, remove if from the main unit before trying to replace the
Transfer Belt Assembly.
• When removing the Finishing Option, support the horizontal transport unit with your hand
to prevent if from dropping.
1. Turn OFF the main switch.
2. Open the Right Door.
4025E018AA
3. Open the Left Door.
4025E022AA
4. Grasp the handle, and remove the waste toner
bottle.
NOTES
• Raise the waste toner bottle gently before remov-
ing it.
• If scattered toner has accumulated in the vicinity of
the toner collecting port, do not tilt the waste toner
4025E023AA
bottle when removing it.
• Do not leave the waste toner bottle in a tilted condi-
tion after removing it.
5. Pull out the Image Transfer Belt Unit.
4025E024AA
E-19