2-5.
CLEANING AND DISASSEMBLY OF THE ENGINE PARTS
(1)
Cleaning of the Transfer Belt Unit
NOTES
• If the dry cloth is not effective in removing dirt, dampen it with alcohol.
• Do not use a cloth wet with water.
• If any solvent is to be used, select one from among the following:
IPA, ethyl alcohol, PPC Cleaner, and Solmix AP-7.
• When the solvent has been used for cleaning, make 28 or more copies using A3 blank
sheets of paper to remove image noise.
1. Remove the Transfer Belt Unit.
Meintenance Schedule Section
2. Wipe the surface of the Transfer Belt with a dry
cloth.
4004D228AA
D-28