Erasing Some Parts Of The Document For Copying; Edge/Frame Erase - Minolta Di250f Operator's Manual

10. Erasing Some Parts of the Document for Copying

Edge/Frame Erase

Some parts of the document can be erased when copying to avoid any unwanted marks such as those left
by hole punching. It is also convenient for erasing header data from facsimiles that have been received,
such as the date of receipt or sender's name.
• Left edge erasing mode
A A
1166O393AA
Erasing
Load the document in the unit.
1
"Handling Documents"
Press the Copy key.
2
Auxiliary
Select
3
Edge/Frame Erase
Touch to set the position erased. (Left
4
Edge Erase, Top Edge Erase, Frame Erase)
• Top edge erasing mode
A
p.1-20
, and touch
.
1171P097EA
1171P098EA
• Frame erasing mode
A
1166O394AA
Touch or to select the width to be
5
erased, and touch
NOTE
The width to be erased in each erasing mode is
the width to be erased from the original
document. Therefore, care must be taken when
making enlargements or reductions.
Useful Tips
• Figures ranging from 1/4to 3/4 inch can be
set.
• Every time is touched, the set value is
decreased by 1/16 inch. Every time
touched, the set value is increased by 1/16
inch.
Press the Start key.
6
Copying starts.
4-27
A
A
1166O395AA
.
Enter
1171P099EA
is